.
Exwell ‘B’ Type Shifting Tool

The B Type Shifting Tool runs with a standard string of wireline tools is used to open or close all of the Sliding Sleeves. The Keys are shaped so that when travelling in one direction, their sloped surface at one end allows them to pass through the Sliding Sleeve Door. When reverse in the other direction, the 90 degree shoulder or the Keys will engage and shift the Sliding Sleeve.

When either the fully open or closed position is reached, Standard Keys are released by nogo on the inclined shoulder inside the Sliding Sleeve Door which forces the Keys inward and disengages them from the Sliding Sleeve. In case if the Sliding Sleeve is jam, the pin on the Shifting Tool can be sheared and release the keys from the Closing Sleeve. (The fact that the Shear Pin does not shear is an indication that the Closing Sleeve should be fully positioned).


Technical Specification:

TASSEMBLY P/N O.D(KEYS
EXPANDED)
TOTAL OD SSD I.D FISH NECK CONNECTION
E42000007-1250 1.488"-1.392" 1.240" 1.250" 1.000" 5/8"11UN
E42000007-1375 1.718"-1.638" 1.366" 1.375" 1.000" 5/8"11UN
E42000007-1500 1.629"-1.665" 1.490" 1.500" 1.188" 5/16"10UN
E42000007-1625 1.992"-1.897" 1.615" 1.625" 1.188" 5/16"10UN
E42000007-1710 2.156"-2.110" 1.690" 1.710" 1.188" 5/16"10UN
E42000007-1781 2.177"-2.076" 1.750" 1.781" 1.375" 5/16"10UN
E42000007-1875 2.210"-2.108" 1.840" 1.875" 1.375" 5/16"10UN
E42000007-2000 2.494"-2.356" 1.840" 2.000" 1.375" 5/16"10UN
E42000007-2125 2.494"-2.356" 1.970" 2.125" 1.375" 5/16"10UN
E42000007-2188 2.592" 2.156" 2.188" 1.750" 5/16"10UN
E42000007-2313 2.592" 2.156" 2.313" 1.750" 5/16"10UN
E42000007-2562 3.123"-2.966" 2.530" 2.562" 1.750" 5/16"10UN
E42000007-2750 3.156"-3.015" 2.718" 2.750" 2.313" 1-1/16"10UN
E42000007-2813 3.156"-3.015" 2.718" 2.813" 2.313" 1-1/16"10UN
E42000007-3125 3.604"-3.486" 3.060" 3.125" 1.750" 1-1/16"10UN
E42000007-3250 3.746"-3.610" 3.200" 3.250" 3.213" 1-1/16"10UN
E42000007-3313 3.734"-3.616" 3.250" 3.313" 2.313" 1-1/16"10UN
E42000007-3437 4.060"-4.140" 3.410" 3.437" 2.313" 1-1/16"10UN
E42000007-3562 4.060"-4.140" 3.410" 3.562" 2.313" 1-1/16"10UN
E42000007-3688 4.250"-4.150" 3.670" 3.688" 3.125" 1-1/16"10UN
E42000007-3750 4.250"-4.150" 3.670" 3.750" 3.125" 1-1/16"10UN
E42000007-3813 4.250"-4.150" 3.670" 3.813" 3.125" 1-1/16"10UN
E42000007-4000 4.504"-4.360" 3.850" 4.000" 2.313" 1-1/16"10UN
E42000007-4125 4.504"-4.360" 3.850" 4.0125" 2.313" 1-1/16"10UN
E42000007-4313 4.918"-4.838" 4.250" 4.313" 2.313" 1-1/16"10UN
E42000007-4437 5.054" 4.420" 4.437" 3.125" 1-1/16"10UN
E42000007-4500 5.054" 4.420" 4.500" 3.125" 1-1/16"10UN
E42000007-4562 5.068"-4.925" 4.520" 4.562" 3.125" 1-1/16"10UN
E42000007-5125 5.530" 5.100" 5.125" 3.125" 1-1/16"10UN
E42000007-5250 5.760"-5.700" 5.230" 5.250" 3.125" 1-1/16"10UN
E42000007-5500 6.020"-5.940" 5.4600" 5.500" 3.125" 1-1/16"10UN
E42000007-5625 6.140"-6.060" 5.600" 5.625" 3.125" 1-1/16"10UN
EXWELL ‘B’ TYPE SHIFTING TOOLS

Product Enquiries


Sales & Support
sales@exwelloilfield.com